Description
For Sale: Lionel Alco S2 Motor Mount for 3 Rail to 2 Rail Conversion PN#622AN
Note: Motor and engine shell not included. Photos are for demonstration purposes only.
The motor mount is intended for a 30mm diameter motor. Since various brands of motors have different hole positions on the ends, the face plates will need clearance pilot holes drilled in the correction position for alignment. 2 Screws (3m x 12mm long with a 0.5 Pitch) will be needed to mount this part firmed to the floor of the model.
We also have available this same product with no holes so that the modeler can use the motor they have in hand. Choose which you want.
This part is printed in ABS and should drill easily without clogging the drill bit.
Parts included:
1 Motor Mount 3D Printed
Note: You can purchase collectively, under separate cover, this motor mount, motor and mounting screws at the following link: Lionel Alco S2 Motor Mount with 12VDC Motor 3 Rail to 2 Rail Conversion PN#621AN
