Description
For Sale: Motor cradle, Flexible, 3-D printed PN#745AN
(Note: This sale is for the cradle only. The trolley transmission is shown in the photo as an example only.)
Not unlike working on a nearly finished model, adding detail and trying not to do to much damage in the meantime to finish, we typically use a larger foam cradle. I found that building power trucks with motors and fiddling around with the construction, I needed a small cradle to hold the mechanism steady. This has allowed me to be more efficient, careful and attentive because it is like having a 3rd hand.
This cradle is 3D printed using TPU flexible filament with approximately 60% infill. Consequently, the fingers are flexible and can hold motors centered that are 30 millimeters in diameter or slightly larger. The foot print is 4.5″ in length by 2.5″ in width. The narrowest internal center motor space is 1.25″ wide with a depth of 1.25″. Facilitating less handling while performing assembling work makes a big difference whether you are install a chain on the sprockets, soldering wires or drilling and tapping for mounting screws.


