Description
For Sale: All Nation Sierra Railroad Coach (no trucks/no wire) #6 PN# 4565
(photo of partially built model is for your viewing only. This model, trucks and wire are not included)
We have had a good number of requests to bring back the Sierra Coach and Combine passenger cars that were originally sold by Wm. K. Walthers. We have tried to make improvements to these models with 3D Printed sides with the details better than the sides supplied in previous years which were stamped in tin.
These kits are semi-challenging to put together and will look good if modeling the period when these were in service.
Some clean up of brim or printer support material may be required before assembling the pieces. We supply the original documentation with this as reference only so it is a good guide for going about bringing this kit to life. Astute judgement should be made regarding the proper time to prime and paint these as one goes through the process of assembly.
The 3D printed parts are ABS filament which is easy to drill and tap. This might be an ideal model to do some hand painting before putting on decals.
Trucks are not included.
Parts List:
- 2 Eve Trim (ABS)
- 1 Roof M394
- 1 Floor M457
- 2 Sides (ABS)
- 2 Ends #1087 ABS
- 1 Valance V154
- 4 Globe vents #857
- 2 End sills #1089 ABS
- 1 Smoke stack #3169 or 941-1109 Diecast or ABS
- 2 Brake wheels #0383
- 4 Roof Beads #979
- 4 Platform Steps #947
- 2 Queen Posts #3916 or 1107
- 2 Turnbuckles #3182C or 1073
- 2 Bolsters #891 ABS
- 1 Air tank #1090 ABS
- 1 Brake Cylinder #3913 or 1110
- 4 Brake Levers #1106 Diecast or ABS
- 2 Couplers #096
- Acetate for windows (sides, ends and clerestory)
- 18 Clerestory window frames #1108 ABS
The following pieces may be in wood or ABS:
- 1 Cross member M459
- 1 Cross member M221
- Enough material for M458’s (cut to length): needle beam, side sill, center sill, filler block
- 1 Brake rigging
- Wire: Not provided
- 1 Instruction sheet
Suggested trucks sold separately: All Nation Line Wood Beam Trucks Kit PN#3847K
