Description
For Sale: All Nation Atlantic Coast Line Class M3 Caboose Detail Kit PN#438ANK
This detail kit complements the All Nation Atlantic Coast Line Class M3 BASIC Caboose KIT – Basic Beginner or PN#394AN which is sold under separate purchase. When you by the basic kit, the next step would be to add this detail kit to make the caboose look spiffy!
Detail Kit Parts List:
| 1 Smoke Stack (Diecast) |
| 2 Roof Walk Braces (Brass or Metal depending on available stock at time of fulfillment) |
| 1 Underframe Toolbox ABS & Flex (5 Parts to be assembled) |
| 4 Grab Irons (Brass) |
| Brass Wire 20Gauge (20″) & 22Gauge (20″) |
| 2 Air Hose (Brass) |
| 1 Brake Set (Plastic) |
| 1 Brake Wheels |
| 2 Ladders (Brass) |
| 4 Turnbuckles (Plastic) |
| 8 Lift Rings/Eye Hooks (Brass) |
| 2 Marker Light/Brackets (Brass) |
| 4 Jewel Marker Light Green |
| 2 Jewel Marker Light Red |
| 2 Couplers/Coupler Housing (Diecast) Dummy or Bottom Operated depending on available stock at time of fulfillment. |
| (2) 4-40 x 5/8 Filister Head Screws |
1. Lay out all 5 pieces.
- Box
- Top block
- Front access panel (note front hinge surface detail)
- Two (2) support brackets
2. Clean any support material left from the printer build plate and make sure everything is to your satisfaction. Painting/weathering before assembly is left to the option of the modeler.
3. Dry fit pieces for familiarity.
4. Glue: CA glue was used in this particular sample.
A. Attach the top block to the box
B. Attach the front access panel (note hinge detail to outside), placing glue only along the top edge as panel is partially functional and can be slightly opened if desired.
C. Glue the supports to underside of the tool box making sure the forward support clears the access panel.
5. Once glue has set, glue the entire unit to the underframe of the caboose with the access door to the outside of the car. Enjoy!
